NOTES
consist of more
than one strip
with this address
appearing in more
than one strip.
Be sure address
located has EXPR
test
data for your
[10] Have all
No
Yes
2. Diagnostic
firmware
[11] Call
Yes
No
6
7
8
048-63, 59, 65, 67
048-55, 52, 65, 57
FAILING
PHASE
WITH FAILING PHASE
STM3 PUMACRO OPER (READ), OPAD(=4DZWMPMACRO), DATA (4DZDATA),
TESTCNT(=0), ATERM, TIMEOUT(=30000)
048-40, 42, 63, 59, 52, 49
assistance
suspect circuit packs
TABLE B and TLP
failing phase been
associated with
statement implies
CIRCUIT PACK ASSOCIATED
CIRCUIT PACK LOCATION
4ESAC for
1. Phase PIDENT may
TABLE B
microprocessor
failure at index
address of
FG55, 57, 61, 62, 63, 73
FG61, 62, 64, 65
FG60, 63, 64, 75
[8] Locate
DIAL
statement
PUMACRO DIAL
subroutines called
or phase PIDENT if no
in last subroutine called
[6] Locate fourth raw data
failing address)
[7] See NOTE 1. Locate
first failing address
NCSU DIAGNOSTIC PHASES CONTAINING A PUMACRO DIAL STATEMENT
failing address
associated with first
PUMACRO statement
[9] See NOTE 2. Is
DIAL
statement a
CLEAR DIAGNOSTIC FAILURE BY ANALYZING RAW DATA
replaced
that fault was
detected by
[5] Determine location and function
AND
Figure 2 — Example of PUMACRO DIAL Statement
[Figure 2]
word following mismatch data
[Figure 1, Page 2] (first
TAP
PAGE 3 of 6
234-151-013
105
Issue 8
DEC 1995
