TABLE A
DESCRIPTION*
PUWB bits 9-7 = memory level
For time slot memories and busy-idle map
A = B = 0, C = buffer bus address
A = fault chain, B = reply bus
PUWB bits 8-0 = matrix under test
A (bits 11-2) = SP K code
A = B = 0, C = CC pulse point address
BBR part: A = B = 0, C = buffer bus address
"
MA
"
pulse point accessed by an SP:
DESCRIPTION OF DATA CONTAINED IN SECOND AND THIRD DATA WORD FOR EACH TYPE DIAL TEST STATEMENT
STATEMENT
DESCRIPTION*
DIAL TEST
A(bits 11-2) = SP K code
C = address of point
A(bits 11-2) = SP K code
C = address of point
A = B = 0, C = specified expected result
for VIC diagnostic B = VIC failing test
PUWB bits 16-10 = address of memory accessed
Same as MEMOPI statement
SCANI
SDI
SESOP
STORE
TMSOP
TMSOPI
TSIESR
TSIMOP
*The following format relates A, B, and C to the
second and third data words following mismatch
data:
A = PUEA/PUAB
B = PUWB (bits 35-24) = OPAD, (bits 35-29) = OPCODE
C = PUWB (bits 23-0) = ADDRESS
SECOND WORD
AAAABBBB
THIRD WORD
CCCCCCCC
ANALYZE FAILING TEST DATA TO DETERMINE TEST FUNCTION
PUOP part: standard PUB format†
Memories bit 0 = switching and permuting CKT
PUWB bits 16-10 = address of memory accessed
Standard PUB format†
Standard PUB format†
Standard PUB format† except C = don’t care
†The standard PUB format is:
A = B = 0, C = CC pulse point address
"
MA
"
pulse point accessed by CC pulse point
B = SP OP code to read scan points 0(1540)
B = SP OPCODE to read SD points 0(1440)
B = SP OPCODE to bit pulse point 0 (1640)
C = CC pulse point address (see PIDENT prolog)
STATEMENT
C = address of point
Same as PLOP statement
CCBB
CITOP
CITOPI
CLKOP
MEMOPI
MTXMOP
PLOP
PUDROP
PUDROPI
PULSE
PUOP
PUOPI
PUOPBBR
PUOPIBBR
DIAL TEST
Standard PUB format†
Standard PUB format†
Standard PUB format†
Standard PUB format†
Standard PUB format†
PULSI
DLP
PAGE 2 of 3
234-151-013
502
Issue 8
DEC 1995
