ATAGO Twilight AT-CM800a, Инструкция по эксплуатации

Страница: 34 / 45

-31-
⑧Press the key.
The current upper limit value will blink on the
display (Fig.14-4).
⑨Adjust the displayed value to the desired
upper limit value by using the and/or
keys.
⑩Press the key.
The upper limit value is now set and the
display returns to [4] (Fig.14-3).
⑪Each time the key is pressed, the menu
item displayed switches in the order of: [5]
and Brix(%).
Select Brix(%).
N If 30 seconds pass when in steps ③
through ⑩ above, the display returns to
the continuous display of the Brix(%).
m Recorder Output when an error message
is displayed
Please take note of the recorder output
signal when an error message is displayed
on the CM-800α unit.
Error Message Recorder Output
LL.L 4mA
HH.H 20mA
EE.E 20mA
．．． Corresponds displayed Brix(%) value.
Fig.14-4 Example: When the upper limit value of the
recorder output range is set to Brix 60.0%.