ATAGO Twilight AT-CM800a, Инструкция по эксплуатации

Страница: 16 / 45

-13-
5. Mounting the CM-800
α
and AC adapter AD-32 (AD-33 or
AD-34) (Optional)

WARNING
◇Turn off the power (DC24V) before mounting. If AD-32 (AD-33 or AD-34) is used,
disconnect the power cable's plug from the AC 100-240V outlet before beginning.
Electrical shock may occur if the unit is mounted with the power connected.
①Mounting screws (Fig.5-1，Fig.5-2)
The CM-800α and the AD-32 (AD-33 or AD-34)
each have four mounting screw locations.
Use the screws supplied with the stand to mount the
CM-800α and AD-32 (AD-33 or AD-34) on the
stand or panel plate.
The depth of the screw locations is 10mm, M6.
Example of screw configuration (Fig.5-3)
①CM-800α or AD-32 (AD-33 or AD-34)
②Washer (M6)
③Spring washer (M6)
④Hexagonal-head bolt M6×10
m Hexagonal-head bolts, spring washers and
washers are included as standard accessories
with the stand (optional).
N Length of the hexagonal-head bolt =
(Screw hole depth, 10mm) + (Panel plate length)
Mounting on a stand (optional) (Fig.5-4)
C For information on ordering a stand, see page 34.
③
①
②
CM-800α
Fig.5-1
④
AD-32, AD-33 or AD-34
Fig.5-2
Fig.5-4
Fig.5-3
①
①
148mm
98mm
148mm
98mm