ATAGO Twilight AT-CM800a, Инструкция по эксплуатации

Страница: 25 / 45

-22-
9. Power Supply

WARNING
◇ NEVER connect the CM-800α to power other than DC24V (allowable
fluctuation is ±10%).
◇NEVER insert the plug of the AD-32 (AD-33 or AD-34) AC Adapter to an outlet
other than AC 100-240V.
◇NEVER use a power cable that is damaged, cut, broken, or altered. Fire, electrical
shock or burns may occur.
To purchase replacement power cables, contact an Authorized ATAGO
Distributor.

CAUTION
◇NEVER plug the AD-32 (AD-33 or AD-34) AC Adapter in with wet hands.
◇When disconnecting the power cable from an AC 100-240V outlet, be sure to
remove by pulling the plug.
Pulling by the cable may damage the cable and cause fire or electrical shock.
◇When connecting the AC Adapter AD-32 (AD-33 or AD-34) to an outlet, be sure
to connect the ground.
m The CM-800α has no power switch. When power is supplied to the CM-800α, the measurement
value display illuminates and the Brix(%) measurement commences.
（
1
）
When the CM-800
α
is used alone
①Confirm that the power (DC24V) input cable is properly connected to the CM-800α and the DC24V power
supply.
②When the DC24V power is supplied, the CM-800α turns on and the measurement value display will
illuminate.
（
2
）
When the AC adapter AD-32, AD-33 or AD-34 (optional) is used
①Confirm that the CM-800α and the AD-32 (AD-33 or AD-34) are properly connected.
②When the AD-32 (AD-33 or AD-34) power cable is plugged into an outlet, the CM-800α turns on and the
measurement value display will illuminate.
When the AD-32 (AD-33 or AD-34) is connected to an outlet and the DC24V is output, a lamp will
illuminate on the bottom of the AC Adapter.