Asus RX3041H, Руководство пользователя

Страница: 73 / 143

RX3041H User’s Manual Chapter 9. Configuring Firewall/NAT Settings
59
2. Click on the icon of the rule to be modified in the inbound ACL table or select the rule number
from the “ ID ” drop-down list.
3. Make desired changes to any or all of the following fields: action, source/destination IP,
source/destination port, protocol, port mapping, time ranges, application filtering, and log. Please
see Table 9.1 for explanation of these fields.
4. Click on the button to modify this ACL rule. The new settings for this ACL rule will then be
displayed in the inbound access control list table at the bottom half of the Inbound ACL
configuration page.
9.4.3 Delete an Inbound ACL Rule
To delete an inbound ACL rule, click on the in front of the rule to be deleted or follow the instructions below:
1. Open the Inbound ACL Rule Configuration Page by clicking on the Firewall
Î
Inbound ACL
menu.
2. Click on the icon of the rule to be deleted in the inbound ACL table or select the rule number
from the “ ID ” drop-down list.
3. Click on the button to delete this ACL rule. Note that the ACL rule deleted will be
removed from the ACL rule table located at the bottom half of the same configuration page.
9.4.4 Display Existing Inbound ACL Rules
To see existing inbound ACL rules, just open the Inbound ACL Rule configuration page by clicking on the
Firewall
Î
Inbound ACL menu.
9.5 Configuring Outbound ACL Rules
Outbound ACL rules allow you to control (allow or deny) Internet or external network access for computers on
your LAN.
9.5.1 Add an Outbound ACL Rule
To add an outbound ACL rule, follow the instructions below:
1. Open the Outbound ACL Rule configuration page by clicking on the
Firewall
Î
Outbound ACL menu.
2. Select “ Add New ” from the “ ID ” drop-down list.
3. Set desired action (Allow or Deny) from the “ Action ” drop-down list.
4. Make changes to any or all of the following fields: source/destination IP,
source/destination port, protocol, NAT, time ranges, application filtering,
and log. Please see Table 9.1 for explanation of these fields. Figure 9.9
illustrates how to create a rule to deny outbound HTTP traffic for a host w/ IP address
192.168.1.15.