Asus P8Z68-V PRO Скачать руководство пользователя страница 82

Страница: 82 / 146

3-16

Chapter 3: BIOS setup

Chapter 3

Hyper-threading [Enabled]

The Intel Hyper-Threading Technology allows a hyper-threading processor to appear as two

logical processors to the operating system, allowing the operating system to schedule two

threads or processes simultaneously.
[Enabled]

Two threads per activated core are enabled.

[Disabled]

Only one thread per activated core is enabled.

Active Processor Cores [All]

Allows you to choose the number of CPU cores to activate in each processor package.

Configuration options: [All] [1] [2] [3]

Limit CPUID Maximum [Disabled]

[Enabled]

Allows legacy operating systems to boot even without support for CPUs

with extended CPUID functions.

[Disabled]

Disables this function.

Execute Disable Bit [Enabled]

[Enabled]

Enables the No-Execution Page Protection Technology.

[Disabled]

Forces the XD feature flag to always return to zero (0).

Intel(R) Virtualization Tech [Disabled]

[Enabled]

Allows a hardware platform to run multiple operating systems separately

and simultaneously, enabling one system to virtually function as several

systems.

[Disabled]

Disables this function.

Enhanced Intel SpeedStep Technology [Enabled]

Allows you to enable or disable the Enhanced Intel

SpeedStep Technology (EIST).

[Disabled]

The CPU runs at its default speed.

[Enabled]

The operating system controls the CPU speed.

Turbo Mode [Enabled]

This item appears only when you set the

EIST

item to [Enabled] and allows you to enable or

disable the Intel

Turbo Mode Technology.

[Enabled]

Allows processor cores to run faster than marked frequency in specific

condition.

[Disabled]

Disables this function.

CPU C1E [Auto]

[Enabled]

Enables the C1E support function. This item should be enabled in order to

enable the Enhanced Halt State.

[Disabled]

Disables this function.

CPU C3 Report [Auto]

Allows you to disable or enable the CPU C3 report to OS.

CPU C6 Report [Auto]

Allows you to disable or enable the CPU C6 report to OS.

Содержание P8Z68-V PRO



















































































































































Результаты поиска

Содержание P8Z68-V PRO

Отзывы:

Похожие инструкции для P8Z68-V PRO

Бренды по названию

Популярные бренды

Asus P8Z68-V PRO, Руководство пользователя

Результаты поиска

Содержание P8Z68-V PRO

Отзывы:

Похожие инструкции для P8Z68-V PRO

Бренды по названию

Популярные бренды