Asus P5Q SE R Скачать руководство пользователя

Страница: 9 / 162

Safety information

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

• When adding or removing devices to or from the system, ensure that the power

cables for the devices are unplugged before the signal cables are connected. If

possible, disconnect all power cables from the existing system before you add

a device.

• Before connecting or removing signal cables from the motherboard, ensure

that all power cables are unplugged.

• Seek professional assistance before using an adpater or extension cord.

These devices could interrupt the grounding circuit.

• Make sure that your power supply is set to the correct voltage in your area. If

you are not sure about the voltage of the electrical outlet you are using, contact

your local power company.

•

If the power supply is broken, do not try to fix it by yourself. Contact a qualified

service technician or your retailer.

Operation safety

• Before installing the motherboard and adding devices on it, carefully read all

the manuals that came with the package.

• Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

• Place the product on a stable surface.
•

If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

This symbol of the crossed out wheeled bin indicates that the product (electrical

and electronic equipment, Mercury-containing button cell battery) should not

be placed in municipal waste. Check local regulations for disposal of electronic

products.

Содержание P5Q SE R



































































































































































Результаты поиска

Содержание P5Q SE R

Отзывы:

Похожие инструкции для P5Q SE R

Бренды по названию

Популярные бренды

Asus P5Q SE R, Руководство пользователя

Результаты поиска

Содержание P5Q SE R

Отзывы:

Похожие инструкции для P5Q SE R

Бренды по названию

Популярные бренды