Asus P5Q SE R Скачать руководство пользователя

Страница: 153 / 162

ASUS P5Q SE/R

5-47

4. The Disks item is highlighted, press <Enter> to select the hard disk drives to

configure as RAID. The following pop-up screen appears.

[

SELECT DISKS

]

[

↑↓

]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

Port Drive Model Serial # Size Status

0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
2 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
3 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

Select 2 to 4 disks to use in creating the volume.

5. Use the up/down arrow key to highlight the drive you want to set, then press

<Space> to select. A small triangle marks the selected drive. Press <Enter>

after completing your selection.

6. When the Stripe Size item is highlighted, press the up/down arrow key

to select the stripe size for the RAID 5 array, then press <Enter>.

The available stripe size values range from 4 KB to 128 KB. The default stripe

size is 64 KB.

TIP: We recommend a lower stripe size for server systems, and a higher stripe

size for multimedia computer systems used mainly for audio and video editing.

7. Key in the RAID volume capacity that you want, then press <Enter> when

the Capacity item is highlighted. The default value indicates the maximum

allowed capacity.

8. Press <Enter> when the Create Volume item is highlighted. This warning

message appears.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

9. Press <Y> to create the RAID volume and return to the main menu or <N> to

go back to the Create Volume menu.

Содержание P5Q SE R



































































































































































Результаты поиска

Содержание P5Q SE R

Отзывы:

Похожие инструкции для P5Q SE R

Бренды по названию

Популярные бренды

Asus P5Q SE R, Руководство пользователя

Результаты поиска

Содержание P5Q SE R

Отзывы:

Похожие инструкции для P5Q SE R

Бренды по названию

Популярные бренды