Asus P5Q SE R Скачать руководство пользователя | Manualshive

Страница: 8 / 162

background image

viii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with manufacturer’s

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modifications

to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

«
...
6
7
8
9
10
...
»

Содержание P5Q SE R



































































































































































Отзывы:

Нет отзывов

Похожие инструкции для P5Q SE R

Бренд: Yamaha Страницы: 20

Industrial NUC-J6412

Бренд: ASROCK Страницы: 2

Бренд: Xeltek Страницы: 19

Бренд: Biostar Страницы: 49

phyBOARD-Subra-i.MX6

Бренд: Phytec Страницы: 2

Бренд: Telit Wireless Solutions Страницы: 5

Advance 10T Series

Бренд: QDI Страницы: 74

Бренд: Acorp Страницы: 66

Бренд: MINATO Страницы: 125

Бренд: Maxim Страницы: 7

Бренд: Aaeon Страницы: 108

Бренд: Analog Devices Страницы: 8

Бренд: Texas Instruments Страницы: 23

Бренд: TRU Components Страницы: 4

Бренд: ComNav Technology Страницы: 28

Бренд: TYAN Страницы: 64

Бренд: Analog Devices Страницы: 16

EVAL-AD5761RSDZ

Бренд: Analog Devices Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды