Asus P5Q SE R Скачать руководство пользователя

Страница: 25 / 162

ASUS P5Q SE/R

2-1

2.1

Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or a metal

object, such as the power supply case, before handling components to

avoid damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power

supply is switched off or the power cord is detached from the power

supply. Failure to do so may cause severe damage to the motherboard,

peripherals, and/or components.

Onboard LED

The motherboard comes with a standby power LED that lights up to indicate that

the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you

should shut down the system and unplug the power cable before removing or

plugging in any motherboard component. The illustration below shows the location

of the onboard LED.

P5Q SE/R

P5Q SE/R Onboard LED

SB_PWR

Standby

Power

OFF

Powered

Off

Содержание P5Q SE R



































































































































































Результаты поиска

Содержание P5Q SE R

Отзывы:

Похожие инструкции для P5Q SE R

Бренды по названию

Популярные бренды

Asus P5Q SE R, Руководство пользователя

Результаты поиска

Содержание P5Q SE R

Отзывы:

Похожие инструкции для P5Q SE R

Бренды по названию

Популярные бренды