Asus P5Q SE R Скачать руководство пользователя

Страница: 56 / 162

2-32

Chapter 2: Hardware information

•

System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. Connect the chassis

power LED cable to this connector. The system power LED lights up when

you turn on the system power, and blinks when the system is in sleep mode.

•

Hard disk drive activity LED (2-pin IDE_LED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity

LED cable to this connector. The IDE LED lights up or flashes when data is

read from or written to the HDD.

•

System warning speaker (4-pin SPEAKER)

This 4-pin connector is for the chassis-mounted system warning speaker. The

speaker allows you to hear system beeps and warnings.

•

ATX power button/soft-off button (2-pin PWRSW)

This connector is for the system power button. Pressing the power button

turns the system on or puts the system in sleep or soft-off mode depending

on the BIOS settings. Pressing the power switch for more than four seconds

while the system is ON turns the system OFF.

•

Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system

reboot without turning off the system power.

13. System panel connector (20-8 pin PANEL)

This connector supports several chassis-mounted functions.

P5Q SE/R

System Panel Connector

Requires an ATX power supply

PLED

PW
R

Speake

Ground

RESET

Ground

Reset

Ground Ground

PWRSW

PLED

IDE_LED-

+IDE_LED

PLED

SPEAKER

PANEL

Содержание P5Q SE R



































































































































































Результаты поиска

Содержание P5Q SE R

Отзывы:

Похожие инструкции для P5Q SE R

Бренды по названию

Популярные бренды

Asus P5Q SE R, Руководство пользователя

Результаты поиска

Содержание P5Q SE R

Отзывы:

Похожие инструкции для P5Q SE R

Бренды по названию

Популярные бренды