manualshive.com logo in svg

Asus P4B533-E, Руководство пользователя, Страница: 8 / 148

Поделиться
Скачать
Asus P4B533-E Скачать руководство пользователя страница 8

viii

About this guide

This user guide contains the information you need when installing the
ASUS P4B533-E motherboard.

How this guide is organized

This manual contains the following parts:

•

Chapter 1: Product introduction

This chapter describes the features of the P4B533-E motherboard. It
includes brief descriptions of the special attributes of the motherboard
and the new technology it supports.

•

Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to
perform when installing system components. It includes description of
the switches, jumpers, and connectors on the motherboard.

•

Chapter 3: Powering up

This chapter describes the power up sequence and gives information
on the BIOS beep codes.

•

Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS
Setup menus. Detailed descriptions of the BIOS parameters are also
provided.

•

Chapter 5: Software support

This chapter describes the contents of the support CD that comes with
the motherboard package.

•

Index

This part contains an alphabetical list of the topics found in this
document.

Содержание P4B533-E





















































































































































Отзывы:

Нет отзывов