Asus P4B533-E Скачать руководство пользователя страница 132

Страница: 132 / 148

5-20

Chapter 5: Software support

5.3.5 Winbond Voice Editor

The Winbond Voice Editor software allows you to customize the vocal
POST messages. Install the software from the software menu in the
support CD. See section “5.2.3 Software menu”.

Follow these steps to use the Winbond Voice Editor.

Launching the program

Launch the program either from the Winbond Voice Editor icon on your
desktop, or from the Windows Start menu,

Programs/Winbond Voice Editor/

Voice Editor

The Winbond Voice Editor screen appears.

Playing the default wave files

To play the default wave files, simply click on a POST event on the left
side of the screen, then click the Play button.

Default Messages

POST Events

The default language setting is English.

To avoid conflicts, do not run the Winbond Voice Editor while running
the ASUS PC Probe.

Содержание P4B533-E





















































































































































Результаты поиска

Содержание P4B533-E

Отзывы:

Asus P4B533-E, Руководство пользователя, Страница: 132 / 148

Результаты поиска

Содержание P4B533-E

Отзывы: