manualshive.com logo in svg

Asus P4B533-E, Руководство пользователя, Страница: 15 / 148

Поделиться
Скачать
Asus P4B533-E Скачать руководство пользователя страница 15

ASUS P4B533-E motherboard user guide

1-1

1.1

Welcome!

Thank you for buying the ASUS

®

 P4B533-E motherboard!

The ASUS

 

P4B533-E motherboard delivers a host of new features and

latest technologies making it another standout in the long line of ASUS
quality motherboards!

The P4B533-E incorporates the Intel

® 

 Pentium

® 

 4 Processor in 478-pin

package coupled with the Intel

® 

 845E (Brookdale-E) chipset to set a new

benchmark for an effective desktop platform solution.

Supporting up to 2GB of system memory with PC2100/1600 DDR
SDRAM, high-resolution graphics via an AGP PRO slot, USB 2.0
capability, high-speed data transfers using the RAID/IDE/ATA133 protocol,
and 6-channel PCI audio features, the P4B533-E is your perfect vehicle to
get ahead in the world of power computing!

Before you start installing the motherboard, and hardware devices on it,
check the items in your package with the list below.

1.2

Package contents

Check your P4B533-E package for the following items.

ASUS P4B533-E motherboard

ATX form factor: 12 in x 9.6 in  (30.5 cm x 24.5 cm)

ASUS P4B533-E series support CD

ASUS USB 2.0/GAME module (with 2 USB 2.0 ports and 1 GAME port)

ASUS S/PDIF module (audio models only)

ASUS 2-port 1394 module, two 8-to-6 pin cables (1394 models only)

Three 80-conductor Ultra ATA/133/100 IDE ribbon cables

40-conductor IDE cable

Ribbon cable for a 3.5-inch floppy drive

Bag of extra jumper caps

User Guide

If any of the above items is damaged or missing, contact your retailer.

Содержание P4B533-E





















































































































































Отзывы:

Нет отзывов