manualshive.com logo in svg

Asus P4B533-E, Руководство пользователя, Страница: 58 / 148

Поделиться
Скачать
Asus P4B533-E Скачать руководство пользователя страница 58

2-30

Chapter 2: Hardware information

8. CPU, Chassis, and Power Fan Connectors

(3-pin CPU_FAN, PWR_FAN, CHA_FAN)

The fan connectors support cooling fans of 350mA~740mA (8.88W
max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan
cables to the fan connectors on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Lack of
sufficient air flow within the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on
the fan connectors!

9. Power supply thermal connector (2-pin TRPWR)

If your power supply has a thermal monitoring feature, connect its
thermal sensor cable to this connector.

P4B533-E

®

P4B533-E 12-Volt Fan Connectors

CPU_FAN

PWR_FAN

CHA_FAN

GND

Rotation

+12V

GND

Rotation

+12V

GND

Rotation

+12V

P4B533-E

®

P4B533-E Power Supply Thermal Connector

Ground
TRPWR

TRPWR

Содержание P4B533-E





















































































































































Отзывы:

Нет отзывов