manualshive.com logo in svg

Asus P4B533-E, Руководство пользователя, Страница: 43 / 148

Поделиться
Скачать
Asus P4B533-E Скачать руководство пользователя страница 43

ASUS P4B533-E motherboard user guide

2-15

2.6.3 PCI slots

There are six 32-bit PCI slots in this motherboard. The slots support PCI
cards such as a LAN card, SCSI card, USB card, and other cards that
comply with PCI specifications. The following figure shows a LAN card
installed on a PCI slot.

2.6.4 AGP PRO slot

This motherboard has an Accelerated Graphics Port (AGP) PRO slot that
su1.5V AGP cards. When you buy an AGP card, make sure that
you ask for one with +1.5V specification. Note the notches on the card
golden fingers to ensure that they fit the AGP slot on your motherboard.

If you installed an incorrect AGP card, such as a SiS305-based AGP card
or any other 3.3V AGP card, the onboard red LED (AGP_WARN) lights up,
an indication that the card is not supported on the motherboard. As long as
this LED is lighted, you cannot turn on the system power even if you press
the power button, thus preventing permanent damage to the motherboard.

Install only 1.5V AGP cards on this motherboard!

The AGP PRO slot comes with a warning label and a safety tab.
Remove the label and tab ONLY if you are installing an AGP PRO
card. Use a pointed object, such as a pen tip, to dislodge the tab.

P4B533-E

®

P4B533-E Accelerated Graphics Port (AGP PRO)

Содержание P4B533-E





















































































































































Отзывы:

Нет отзывов