manualshive.com logo in svg

Asus P4B533-E, Руководство пользователя, Страница: 142 / 148

Поделиться
Скачать
Asus P4B533-E Скачать руководство пользователя страница 142

5-30

Chapter 5: Software support

Creating a Security Array with Existing Data Drive

If you would like to use an existing drive that already contains data and/or
is the bootable drive in your system, make sure that the new hard drive
you will use in the array has the same or larger capacity as the existing
drive.

Backup all important data before creating an array. Failure to do so
may cause data loss.

1. In the FastBuild™ utility main menu, press “1” to select Auto Setup.

2. Use the arrow keys to go to the field 

Optimize Array for

 and select

“

Security” with the space bar. The 

Mode 

field displays “

Mirror”.

3. Press <Ctrl-Y> to save your selection. The following message appears:

Depending on the operating system you are installing (or that is
already installed), the RAID driver installation sequence may vary.

5. Press “Y” for the 

Create and Duplicate option. The following window

prompts you to select the source drive to use.

6. Use the arrow keys to select the source drive. The FastBuild utility will

copy all the data from the source drive to the target drive.

7. Press <Ctrl-Y> to save the selection and start the duplication. The

following message appears:

8. Select “Y” to continue. If you select “N”, you will be returned to the

main menu.

9. When the duplication process is completed, the following message

appears confirming that your Security array has been created.

10. Press any key to reboot the system.

11. Install the RAID driver from the support CD that came with the

motherboard package.

Do you want the disk image to be duplicated to another? (Yes/No)

Y - Create and Duplicate

N - Create Only

Start to duplicate the image...

Do you want to continue? (Yes/No)

Y - Continue    N - Abort

Содержание P4B533-E





















































































































































Отзывы:

Нет отзывов