GigaX Series L2 Managed Switch User Guide
113
routing
Forwarding data between your network and the Internet on the
most efficient route, based on the data’s destination IP address
and current network conditions. A device that performs routing is
called a router.
SNMP
Simple Network Management Protocol
The TCP/IP protocol used for network management.
STP
Spanning Tree Protocol
The bridge protocol to avoid packet looping in a complicate
network.
subnet
A subnet is a portion of a network. The subnet is distinguished
from the larger network by a
subnet mask
which selects some of
the computers of the network and excludes all others. The
subnet's computers remain physically connected to the rest of
the parent network, but they are treated as though they were on a
separate network.
See also network mask
.
subnet mask
A mask that defines a subnet.
See also network mask
.
TCP
See TCP/IP
.
TCP/IP
Transmission Control Protocol/Internet Protocol
The basic protocols used on the Internet. TCP is responsible for
dividing data up into packets for delivery and reassembling them
at the destination, while IP is responsible for delivering the
packets from source to destination. When TCP and IP are
bundled with higher-level applications such as HTTP, FTP,
Telnet, etc., TCP/IP refers to this whole suite of protocols.
Содержание GigaX 2124X
