Operation
900912-00C, 04/2019
Innovative Hearth Products
Gemini™ -C Series Direct-Vent Gas Fireplaces
57
Installing the Gemini-C 35/40 Series Log Set
The logs have pins and tabs to assist proper positioning. Upper logs rest on lower logs via pins /tabs. Proper log placement is critical
to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the flames. Follow the log placement
instructions precisely.
NOTE: Do not cover the burner ports.
Table 30 - Log Set
I.D. No.
Description
1
Rear Log
2
Bottom Right Log
3
Left Bottom Log
4
Left Twig Log
5
Right Twig Log
Figure 40 - Locate the log placement tabs
Figure 42 - Install bottom right log (2)
Figure 41 - Install rear log (1)
Catalog number for the entire
set: See
Page 69
.
NOTE
: 35” logs shown. Log # 2 in
the 40”/45” log set will be similar
in shape but will be longer.
Bottom View
Bottom View
Front View
Top View
Pin
Pin
1
2
3
5
4
1
2
3
4
5
1. If necessary, remove the glass door (
Pages 58-59
). Locate the placement tabs (
Figure 40
).
2. Bend up the log placement tabs (
Figure 40
).
Tabs for
Log #2
Tabs for
Log #1
Log Placement Tabs
Do not place
embers over
the big slots
Grate Finger
Log #4
Tabs for Log #2
Tabs for Log #1
3. Install the slots on rear log (1) (
Figure 41
) onto the two tabs indicated in
Figure 40
.
4. Install the slots on bottom right log (2) (
Figure 42
) onto the two tabs indicated in
Figure 40
.
Slots
1
2
Pin for
log #4
Pin for
log #5
Pin for
log #5
Pins for
log #3
Slots
Four (4) total points are used on the burner for log placement
Burner
f i r e - p a r t s . c o m
