Astra KA-700H Скачать руководство пользователя

Страница: 9 / 40

6. How to Operate the KA-700H

1) Turn the power switch “On.”

(

See page 6

)

•

“Astra KA-700H” will be displayed on the operation screen, followed by the Settings Menu.

• Pressing and holding down the start/stop button while all buttons on the display are off will put

the unit in the reset mode. (

See page 21

)

2) Use the start/stop button to choose the settings for the type of item to be peeled.

(

See page 20

)

• Pressing the button and holding it down changes the display screen to the detailed settings.

(

See page 22

)

• If “Arm position wrong – correct” is displayed, return the arm to the correct starting position, and

press the start/stop button again.

3) Affix the item to be peeled (fruit or vegetable) to the holding prong.

• Affix the item so that the prong penetrates the center (core) of the fruit.

• Affix the item so that it touches the base of the prong.

Caution!

If a peeling operation is started when no item is affixed to the

holding prong, contact will occur between peeler blade and

prong, damaging both of these parts.

4) Press the start/stop button.

• Method of operation changes depending on the start mode. (

See page 9

)

• Starts the peeling. Light of the menu button will turn off. During the peeling, start/stop button

flashes.

• If the start/stop button is pressed during peeling, the peeling operation will stop.

5) Remove the item from the holding prong.

If you continue peeling with the same type of item, go back to 3) and repeat.

* If you wish to change the type of peeling item, press down the menu button two seconds to get back to

the item selection screen.

Содержание KA-700H









































Результаты поиска

Содержание KA-700H

Отзывы:

Похожие инструкции для KA-700H

Бренды по названию

Популярные бренды

Astra KA-700H, Руководство по эксплуатации

Результаты поиска

Содержание KA-700H

Отзывы:

Похожие инструкции для KA-700H

Бренды по названию

Популярные бренды