Aston Global Wamba, Руководство пользователя

Страница: 16 / 36

28
• Move to LATITUDE and enter your value. In order to know it, consult an atlas or a map, which
shows the exact latitude. (1)
• Move to LONGITUDE and enter your value. To get this value, please consult an atlas or a map,
which shows the exact longitude. (1)
For a fixed dish setting, LATITUDE and LONGITUDE are optional as it allows exact calculation of the
Azimuth and Elevation for each satellite. However ,in case of a motorized system this data is very important
for the automatic satellite location (LocSat function).
• Move to LOCAL DATE item and enter it using the numerical keypad on your remote control.
• Move to LOCAL TIME item and enter it using the numerical keypad on your remote control.
You may need to set the time and date each time you unplug the receiver from the mains, otherwise the
Program guide will not work properly.
• Go to MENUS LANGUAGE and choose using CH+/CH- keys, the OSD languages.
• Go to AUDIO LANGUAGE and choose using CH+/CH- keys, the audio language by default. (2)(3).
• Go to SUB TITLE LANGUAGE and choose using CH+/CH- keys, the subtitle language.
• Go to EPG LANGUAGE and choose using CH+/CH- keys, the EPG language.
• Go to SUB TITLE and choose using CH+/CH- keys, whether you want automatic subtitles or not.
• Press OK to confirm your choices and go back to the previous menu.
N.B : You can leave this menu without saving the modifications by pressing ESC on your remote control.
(1) If you do not know this value, leave this field empty.
(2) This does not mean that every programme will be in the selected language but the default one if
available.
(3) While watching a TV program you can select a different language pressing the LANG key on the
remote control.
5. Installation
5.1 Installation with a fixed antenna
• Press MENU on your remote control.
• Select INSTALLATION (
쒀
and
쑽
) and press OK to confirm.
• Select ANTENNAS AND SATELLITES PARAMETERS (
쒀
and
쑽
) and press OK to confirm.
• Move the cursor to TYPE OF INSTALLATION (
쒀
and
쑽
) and select FIXED by pressing CH+/CH- .
• Go to NUMBER OF ANTENNAS (
쒀
and
쑽
) and select the numbers of LNBs or antennas according to
your installation by pressing CH+/CH- (a maximum of 4 antennas or 4 LNB are allowed).
In case of multiple reception points installation (multi-switch SMATV or IF to IF type) your LNB might be
externally powered then :
• Move to LNB POWER SUPPLY (
쒀
and
쑽
) and select YES using CH+/CH- .
• Press OK to confirm your installation type, number of antennas or LNB of your external configuration.
A new screen will appear. In this new menu, you should select which satellites you want to receive.
29
• Select the satellite(s) (using
쒀
and
쑽
) you want to receiver and confirm the selection by using CH+/CH- ( YES
should then be displayed for each selected satellite). On the right window you can see the parameters
(Direction, Azimuth, Elevation etc..... ) for each selected satellite for information purposes.
The number of selected satellites can not exceed the number of antennas or the external LNB .
• Once you have selected the satellites you wish to receive, press OK to confirm and go back to the next step.
A new menu will appear, you must specify the LNB type as well as the connection accessories that are used
in your outdoor installation.
• Select the dish you want to set up (in the case of a multiple installation) using
쑸
and
쑺
and choose the
type of LNB (UNIVERSAL 1, UNIVERSAL 2, C BAND) using CH+/CH- keys.
• In the case of multiple antennas or LNB installation move to the switch (
쒀
and
쑽
) and use CH+/CH- to
choose the type of accessory you are using in your antenna installation (Single Cable, DiSEqC type
switch etc.....)
• Press OK to confirm your configuration and go to the next step.
You will be taken to a new menu that allows you to check the signal level received by each antenna and
LNB by using a signal level indicator.
• Use
쑸
and
쑺
keys to select the dish from which you want to check the signal level and use CH+/CH- keys
to choose the corresponding satellite. The antenna will rotate to aim to each satellite that has been
previously selected and declared as active
Once all parameters are set, a signal level indicator displays the quality of the received signal (1).
• Press OK to confirm your setting for each antenna and corresponding satellite and return to the previous menu.
(1) A reference frequency for each satellite is factory preset to measure the signal strength (this frequency
may not be received in your region), to modify it, please follow the instructions below :
- Press the LOCSAT key.
- Select FREQUENCY (
쒀
and
쑽
) then enter the corresponding frequency.
- Select RATE (
쒀
and
쑽
) and enter the corresponding SYMBOL RATE .
- Select POLARIZATION (
쒀
and
쑽
), then choose the correct polarization by pressing CH+/CH- .
- Press OK to confirm the new parameters.
You can now proceed with automatic installation.
5.2 Installation with motorized antenna
Your receiver allows you to control all DiSEqC motors (like the ASTON TracSat) as well as the 24-36 V standard
actuator or Horizon to Horizon motor using the SatSeeker Interface from ASTON .
For a better understanding of the DiSEqC standard, please refer to the user manual of your TracSat®
DH 12 or DH 23 motor.
If you are using the Aston SatSeeker® DS100 or DS200 DiSEqC Compatible interface, please refer to the
user manual for the required initialisation and correct settings before use with the Wamba.
Before using the motor, make sure that your motor is properly installed and correctly configured.
We recommend that you use the service of a qualified installer if possible.
Using the DiSEqC motor
• Press MENU on your remote control.
English