Astera ARC2, Руководство пользователя, Страница: 5 / 25

5
c. Introduction
Astera ARC2 radio frequency remote control is being used to control Astera's wireless lamps, wireless
controllers and wireless DMX transmitters. The system offers several sets of predefined effects and
predefined programs that can be quickly launched.
For advanced applications the programs can be customized over the Editor (see Chapter 5.a). The re-
playing colors can be defined to fit a theme or corporate identity. These colors can be used in pro-
grams which can be adjusted on speed, brightness and fading effects.
It is also possible, to address, group and synchronize several units and to stretch programs over sev-
eral lamps. For example the RAINBOW effect can be stretched over two or more units displaying the
full rainbow spectrum at the same time.
d. Navigation
Navigation through the system is done with the top 4 buttons of the remote control. Enter confirms a
value, + and – button choose a value and Back moves up 1 level in the navigation.
The top level of the navigation contains direct control, the 3 sets of pre-defined memory programs
(MEMORY 1 – MEMORY 3) as well as an area to store own programs (MEMORY 4) and the SETUP. The
+ and – buttons are used to navigate between them and Enter offers deeper editing of the MEMORY
programs and the setup.
From any point in the navigation, the home button can be pressed to return to the
top level of the navigation. This is especially useful when an inexperienced user gets
lost in advanced settings and is afraid he will alter important settings.
e. Power Button
Power Mode: LIGHT ON: Returns from BLACKOUT to normal operation.
Power Mode: BLACKOUT: Switches all targeted lamps off and keeps them in standby,
causing only minimal battery drainage. In blackout mode,
fixtures can be stored several months