
10
b.
Advanced Adjustments
If adjusting colors, Program-effect, Speed, Fade and Brightness are not enough, a range of advanced
adjustments can be changed in the Editor.
To change additional adjustments of colors and programs enter the Editor then press the plus
and minus buttons choose the setting you want to change and confirm with Enter.
Stobe Speed:
Adjust frequency and confirm with Enter.
Program Direction:
Choose between forward (left to right), backward (right to left) and
if you want to run the effect only once or repeat it in a loop.
Program Parameter:
Changes parameters depending on the program currently running.
Blower Speed:
Changes the power of the blower.
Use Random Colors:
When switched to YES it starts the random color chaser which places ran-
dom colors on the 4 user color channels(C1 – C4).
Each time tap-sync is pressed the 4 user colors will change.
Random Mode:
Features a range of different chaser modes. Overview in Appendix 3.
Random Fade:
Fading time of the random chaser.
c.
Saving Customized Programs
At the end of setting Colors, Programs, Adjustments and Advanced Adjustments your ARC2 can save
the chosen setting to one of the 8 white keys.
To save settings select SAVE TO KEY x while inside the Editor. If you have not
finished a selection, press the Back button until you see “Editor active”.
d.
Additional Editing and Saving Functions
In order to avoid accidental mistakes when saving a special selection to a particular button and over-
writing existing settings, there are several tools to prevent misusage.
In the top navigation, press the Enter button to Enter the Memory settings
Edit Key:
Enter the Editor
Offline Edit:
Enter the Editor and edit programs and adjustments offline, without
displaying the changes on the controlled lamps.
Содержание ARC2
Страница 18: ...18 10 Appendix Appendix 1 Color Index...