
15
Test Radio
The Test pattern Color Change allows you to test the radio frequency range
conveniently by walking away from a lamp just 8-16m while holding the ARC2. If
the Test Radio is activated, the remote switches to minimum output power and
transmits a color change, change every second. If the color change works in that
range, lamps and remote are ok. You might need to move the remote around a
little to avoid interference.
Radio Pin:
The Radio Pin makes it possible for different customers to operate their lamps at
the same place without influencing other lamps. The 4-digit pin can be set to a
unique value and paired with selected lamps. To activate the radio pin, choose a
pin on lamps and remote control, then press PAIR WITH LAMPS. Lamps that do
not have a display and buttons to choose the Radio Pin have to be put into blue
mode before they can be paired with an ARC2.
Factory Reset:
Selecting THIS REMOTE will reset all settings including keylocks and all MEMORY
programs. Resetting LAMPS will ask you to tap individual lamps to select which
of the lamps in range you want to reset.
For event rental companies a factory reset of the ARC2 remote should be done
after each rental job to avoid misleading settings from customers.
Содержание ARC2
Страница 18: ...18 10 Appendix Appendix 1 Color Index...