PikoFormat 38
PikoFormat with 38kHz carrier frequency.
Can be applied to almost any programmable IR application.
PikoPlug
Format for light controller plug connected to Pikosystems’ socket.
Ensto
IR-format for Ensto’s light controller installable on the wall.
Ensto’s light controller’s control.
Adaptive
Pikosystems’ adaptivity codes. Functionability of different transmitters’ adaptivity can be tested with
adaptivity codes. In other works, this format is mainly used as installation tool.
Standby
Command that toggles the device from control mode directly to standby. If this is programmed e.g. on
page’s
E
button, the device toggles to standby mode immediately when
E
is pressed.
PageShift
By choosing this command the desired page can be entered. The value of the format can be:
0–9 to toggle from the page in question directly to desired page (0–9)
13 to toggle to previous page
15 to toggle to next page.
If this is programmed on certain page’s certain button and the value for PageShift is given 3 then the
transmitter toggles directly to page 3 when the button in question is pushed. On the other hand, if 15 is
given as value, then the device toggles to next page.
Name Description Use
