background image

4 Adjustment of settings 

Transmitter settings: sound and buzzer volume, selection time, response time and scanning time can be 
adjusted to match the user’s abilities. Adjustment of settings is carried out as follows: 

1) Wake up the device by pushing a button from 0 to 9. The led of the selected page lights up. 
2) Enter the settings adjustment mode by pushing the buttons A + B. The Prog-led starts blinking. 
3) Select the function that you wish to adjust: 

- push 1, if you want to adjust the sound volume (table 4.1) 
- push 2, if you want to adjust the buzzer, i.e. the ‘beep’ sound volume (table 4.2) 
- push 3, if you want to change the selection time settings (table 4.3) 
- push 4, if you want to adjust the response time settings (table 4.4) 
- push 5, if you want to adjust the scanning time (table 4.5) 

4) Select the desired value from tables 4.1–4.5 by pushing the buttons 0–6. 
5) Accept the value by pushing the button A, cancel the value by pushing the button B. After the 

selection the device makes a beep, and goes to the standby mode. 

 
Tables 4.1–4.5 feature the factory settings of the device in bold font. 

 

 
Table 4.1 Adjustment of the sound volume of assisting speech phrases. 

 

 
Table 4.2 Adjusting the buzzer volume. The beep indicating device functions and pushing of buttons. 

 

Содержание Apollo-15






















Отзывы: