2b) Push the SCANNING switch short (Parameter P5) and Apollo starts to automatically scan
the lines on selected page, the LED indicates the active one. All the lines are not necessarily
scanned, controller will skip unused ones. The scanning speed depends on the settings.
2c) Push the SCANNING switch short (Parameter P5) and Apollo starts to automatically scan
the commands on selected line, the LED indicates the active one. All the commands are not
necessarily scanned, controller will skip unused ones. The scanning speed depends on the
settings.
2d) When the symbol representing the desired function is selected, push the ACCEPTANCE
switch. Now the current function is accepted and Apollo transmits the remote control IR-signal
associated with it and/or possible other additional functions.
6 Factory settings
The Apollo-15 transmitter has been pre-set by the manufacturer, so that at the set-up stage it is not
necessary to start programming from the scratch, instead the device has a number of commands that
can be utilised as they areThe factory settings of the parameters are shown in tables in bold font.
