NOTE!
If you keep the ACCEPTANCE switch pressed for long, Apollo continues transmitting the
remote control signal associated with the function until you release the switch. This feature can be
utilized in such functions where the length of the signal transmission is of significance, such as when
dimming the lights, adjusting the volume, adjusting the height of the bed, etc.
Linear scanning mode 3:
1a) Push the SCANNING switch short (Parameter P5) and Apollo starts to automatically scan
the commands on selected page, the LED indicates the active one. All the commands are not
necessarily scanned, controller will skip unused ones. The scanning speed depends on the
settings.
1b) When the LED representing the desired command is selected, push the ACCEPTANCE
switch. Now the current function is accepted and Apollo transmits the remote control IR-signal
associated with it and/or possible other additional functions.
2a) Push the SCANNING switch long (Parameter P5) and Apollo starts to automatically scan
through the pages (every Page’s signal light switches on in turn). All the Pages are not
necessarily scanned, controller will skip unused ones. The scanning speed depends on the
settings.
2b) When the desired Page LED is lit, push the SCANNING switch again and Apollo select the
Page and starts to automatically scan the commands within the Page.
2c) When the symbol representing the desired function is selected, push the ACCEPTANCE
switch. Now the current function is accepted and Apollo transmits the remote control IR-signal
associated with it and/or possible other additional functions.
Row scanning mode 6:
1a) Push the SCANNING switch short (Parameter P5) and Apollo starts to automatically scan
the lines on selected page, the LED indicates the active one. All the lines are not necessarily
scanned, controller will skip unused ones. The scanning speed depends on the settings.
1b) Push the SCANNING switch short (Parameter P5) and Apollo starts to automatically scan
the commands on selected line, the LED indicates the active one. All the commands are not
necessarily scanned, controller will skip unused ones. The scanning speed depends on the
settings.
1c) When the LED representing the desired command is selected, push the ACCEPTANCE
switch. Now the current function is accepted and Apollo transmits the remote control IR-signal
associated with it and/or possible other additional functions.
2a) Push the SCANNING switch long (Parameter P5) and Apollo starts to automatically scan
through the pages (every Page’s signal light switches on in turn). All the Pages are not
necessarily scanned, controller will skip unused ones. The scanning speed depends on the
settings.
