background image

5. Ability switch functions 

 

Apollo  is  normally  operated  with  membrane  keyboard.  There  is  also  an  option  for  external  ability 
switches.  Apollo  has  six  different  basic  options  for  ability  switches.  The  mode  is  selected  with 
Parameter 6 (P6).  
 
If the user is using external Ability Switch all other options are available: 
 

1. Single ability switch scanning linear  
2. Dual ability switch stepping linear forward  
3. Dual ability switch scanning linear 
4. Single ability switch scanning row mode  
5. Dual ability switch stepping row mode  
6. Dual ability switch scanning row mode  
.  

All these options have the same basic principle: 
 

1. Wake up the unit if it is on “sleep mode” to earlier selected page 
2. Select correct command on that page or select another page 
3. Accept the selection. The acceptance transmits the current function, in other words, the 
remote control signal associated with it and possible other additional functions. 

 

5.1. Operation with a single ability switch mode 

 

Linear scanning mode 1: 

1a)  Push  the  ability  switch  short  (Parameter  P5)  and  Apollo  starts  to  automatically  scan  the 
commands  on  selected  page,  the  LED  indicates  the  active  one.  All  the  commands  are  not 
necessarily  scanned,  controller  will  skip  unused  ones.  The  scanning  speed  depends  on  the 
settings. 
 
1b) When the LED representing the desired command is selected, push the switch again. Now 
the  current  function  is  accepted  and  Apollo  transmits  the  remote  control  IR-signal  associated 
with it and/or possible other additional functions. 
 
2a) Push the ability switch long (Parameter P5) and Apollo starts to automatically scan through 
the  pages  (every  Page’s  signal  light  switches  on  in  turn).  All  the  Pages  are  not  necessarily 
scanned, controller will skip unused ones. The scanning speed depends on the settings. 

 

2b)  When  the  desired  Page  LED  is  lit,  push  the  switch  again  and  Apollo  select  the  Page  and 
starts to automatically scan the commands within the Page. 

 

2c) When the symbol representing the desired function is selected, push the switch again. Now 
the  current  function  is  accepted  and  Apollo  transmits  the  remote  control  IR-signal  associated 
with it and/or possible other additional functions. 
 

Содержание Apollo-15






















Отзывы: