Asset ATLANTIS 120, Инструкция по установке, эксплуатации и обслуживанию

Страница: 42 / 72

6-2
ATLANTIS - Installation, Use and Maintenance - Man cod.-02 - Rev. 02/2011
6.2 First start up (all models)
After the carrying out all the operations described in
chapter 5, proceed as follows:
1 lift the upper plastic cover of the device pulling
it up;
2 fill the ice bank tank (point 5) with clean
water using a bucket or a carafe paying
great attention to prevent wetting the
electrical parts (thermostat and general
switch for model Atlantis 120);
3 fill the tank up to the arrow that indicates
the maximum level
(see point 3)
, do not
fill the tank excessively. After filling the
device it must not be moved from its po-
sition. Any movement of the device could
make water outcome from the ice bank causing great
risks for the person handling or using the dispenser;
4 dry any splashes or drops that are out of the tank
5 open the CO
2
gas by operating the tap on the bottle
and adjusting the pressure
reducer by turning the knob
clockwise;
fig. 6.3
fig. 6.4
fig. 6.5
fig. 6.6