Asset ATLANTIS 120, Инструкция по установке, эксплуатации и обслуживанию

Страница: 34 / 72

5-2
ATLANTIS - Installation, Use and Maintenance - Man cod.-02 - Rev. 02/2011
However, the water dispenser positioning must allow
sufficient ventilation,
in particular, its back and upper
sides must have a minimum free space for ventilation
of at least of 15 cm.
For this reason, the dispenser must
not be placed near direct or indirect heat sources (ex.
ovens, radiators, stoves, coffee machines, etc.).
Plugs for power and water supply must be available near
the water dispenser, and must correspond to the charac-
teristics stated in the technical sheet and be positioned
in way that the power cable and the water hose are not
of any obstacle.
The environment, where the equipment is installed, must
be free of dust or corrosive/explosive gasses.
The location must be without vibrations.
The machine must be sufficiently illuminated in order to
correctly understand the different functions.
In case of a different positioning from the vertical one,
during the transport or installation, once in the right
position wait for at least 24 hours before getting it
started.
5.4 Connections (all models)
5.4.1 Outer accessories
1 Thermostat
2 main switch
3 power supply
4 CO
2
gas supply
5 water supply
IMPORTANT
In accordance with UNI EN 10380
standard lighting for a generic
working area must be of 300 lux
on average (acceptable values
between 200 and 500 lux). If
the equipment is installed in a
Country different from Italy, refer
to the related regulations in force
.
fig. 5.2 - 60 type
fig. 5.1a 120 type - top
fig. 5.1b 120 type - back