Asset ATLANTIS 120, Инструкция по установке, эксплуатации и обслуживанию

Страница: 39 / 72

5-7
ATLANTIS - Installation, Use and Maintenance - Man cod.-02 - Rev. 02/2011
Before inserting the power connection plug of the dispenser
in the socket, make sure that the main switch is positioned
on O
(see photo) and then open the water interception
valve and the CO2 bottle, fill the ice bank tank up to the
level indicated
(see fig. 4)
and follow the instructions
included in the paragraph First Start-up.
5.4.7 Connection of the CO
2
Arrange the CO2 gas line by using the proper plastic tube
with a diameter of 4 mm.
The tube has to be inserted on one
side
(see fig. 5.10)
in the proper
quick coupling placed behind the
dispenser above the water connec-
tion, and the other end of the tube
end has to be inserted into the quick
coupling of the pressure reducer of
the gas bottle.
(see fig. 5.11)
.
Screw the pressure reducer on the gas bottle with a proper
spanner (28mm) if a rechargeable bottle is used
(fig. 5.12)
; in
case a 600gr. single-use gas bottle is used, screw the reducer
on the bottle by hand.
(fig. 5.13)
.
Pay attention to do not lay the bottle during the pressure
reducer screwing phase. Position and fix the bottle in verti-
cal position.
fig.5.10
fig.5.11
fig.5.12
fig.5.13