Assa Abloy EffEff 1340-14, Руководство пользователя

Страница: 43 / 76

43
EN EN Notes
Intended use
Electrical locking devices of doors along escape routes are intended for use in the
commercial sector.
The product has been designed for the safeguarding of escape routes and has
been tested according to the requirements of EltVTR.
Different uses or combinations of devices not described in the approval are not
permitted.
Product variants 1340-14 and -20 are only suitable for surface-mounting on walls.
Product variants 1340-15 and -21 are only suitable for flush-mounting on walls in
a suitable flush-mounted box.
The mounting, installation and commissioning of the product must be carried out
by an electrician, with expertise in escape-door control systems, certified by
ASSA
ABLOY in accordance with the building authority requirements for electrome-
chanical locking on doors in escape routes. The electrician is obliged to apply the
recognised rules of technology, inspection directives of the federal states and to
update this knowledge on a regular basis.
It must be possible to disconnect the device from the power supply circuit at any
time using an easily accessible energy-isolation device.
ASSA ABLOY Sicherheitstechnik GmbH can provide the necessary planning informa-
tion for approved solutions and the device combinations required for your
application. The usage must be coordinated with the requirements of the
building inspectorate. Contact the competent building authority for this purpose.
Compliance with all relevant requirements of the building inspectorate is manda-
tory for use, particularly with respect to the
· coordination of the safety concept with the competent building authority and
· modifications of door elements.
The device is suitable for mounting, installation, configuration and use in
accordance with these instructions. Any use beyond this is deemed to be
non-intended use; devices combinations which are not described are not
permitted.