14
Installation Instructions
SE LP10 9600 Series Exit Device
With MELR
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
7) Installation Instructions (Continued)
1. Fit trim bezel around the reader. Ensure access hole in the bezel aligns with screw hole on reader.
The reader should be mounted so holes face bottom of door (Fig 4b).
2. Align top of reader with top of backplate. Pivot the reader down until seated. Guide wires as
needed to avoid pinching.
3. Secure the reader with (1) #6-32 x 3/8” Phillips or anti-tamper security torx screw to the mounting
plate (Fig 4b, c).
4. Install SE LP10 Reader and Trim Bezel (Continued):
Rim/SVR/CVR shown, assembly is same for mortise
Fig. 4c
Fig. 4b
Trim Bezel
Reader
Outside of
Door
Detail
Torx
security
screw
