Grade 1 Key-In-Lever VR Lever Lock
CL3100 Series
Installation Instructions
FM345 01/19
For Installation Assistance contact Corbin Russwin
1-888-607-5703 • [email protected]
Copyright © 2016, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
9
Figure 13
Lever Tails
10
CL3152 Classroom Intruder Operation Check
11
Cylinder Removal (Conventional)
Note
When inside key locks outside lever, outside key retracts the latchbolt but cannot unlock the outside lever. Outside key
must be rotated back completely clockwise before removing the key.
1. Remove 6 lobe security set screw.
2. Insert key and rotate 45° clockwise to
release lever catch.
3. Depress lever catch and remove lever.
Note
Interchange core cylinders do not require removing
the lever to remove (page 11 step 13D).
12
CL3120 Outside Lever Removal
Figure 14
Classroom Intruder Operation Check
Figure 15
Cylinder Removal
1. Remove 6 lobe security set screw.
2. Orient cam in outside sleeve with flat blade screwdriver to release lever catch button (page 7 step 7).
3. Depress lever catch and remove lever.
Inside lever is marked with
"LOCK" and direction arrow
to indicate locking direction.
Inside:
Rotate key clockwise to lock.
Rotate key counter clockwise
to unlock.
LOCK
Outside:
Rotate key counter
clockwise to lock.
Rotate key clockwise
to unlock.
3
1
3
2
45
˚
lever catch
Lever catch
45°
