Grade 1 Key-In-Lever VR Lever Lock
CL3100 Series
Installation Instructions
FM345 01/19
For Installation Assistance contact Corbin Russwin
1-888-607-5703 • [email protected]
Copyright © 2016, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
11
Figure 16
Core Removal
Figure 17
Core Lever Removal
Figure 18
Core Lever Installation
13
IC Cylinder and Levers - Installation / Removal (cont.)
d
Insert IC Core
1. Insert 6- or 7-pin tailpiece, with appropriate spacer disk,
into the two (2) holes on the back of the cylinder core.
(See spacer type below).
2. Insert control key and turn counter clockwise.
3. Slide core into lever. If core will not fully insert, the cam may
need adjustment for proper tailpiece - slot alignment.
4. Rotate control key clockwise to lock in lever.
5. Remove control key. Hold cylinder with finger and remove key.
Figure 19
Core Lever Installation
Figure 20
Tailpiece Installation
3
4
2
1
5
Spacer Type
Core Type
Thickness
Color/Material
6-pin LFIC
Pyramid
0.197
Blue/Delrin
7-pin LFIC
0.055
Steel-Zinc Plate
6-pin SFIC
0.234
Black/Delrin
Core Type
0.093
Black/Delrin
Tailpiece
End cap
Tailpiece
Schlage core
6-pin SFIC
spacer
6-pin LFIC
spacer
7-pin LFIC
spacer
Corbin Russwin
LFIC 6- or 7-pin
Schalge tailpiece
Note retaining ring location
7-pin SFIC
spacer
SFIC
6- or 7-pin
