1
PaxLock Mortise - Installation
and Commissioning Guide
Overview
Checks to make prior to installation
Through door holes
When installing a PaxLock Mortise it is important to
ensure the environment the PaxLock Mortise is to
be installed in is fit for purpose.
This application note covers the preparation that
should be carried out before, during and after
installation to ensure the longevity of the Net2
PaxLock Mortise as well as correct installation.
This application note also covers a few common
problems which may impact the performance and
quality of the PaxLock Mortise.
Before installing the PaxLock Mortise onto the door it is important to check that the door, frame and any
relevant door furniture are in good working order. This is important to ensure both the longevity and
smooth operation of the PaxLock Mortise once installed.
The PaxLock Mortise has been designed to work with the Yale 8800 series lockset as shown in Figure 1.
The through door holes must be 5/16" diameter and the central follower must have at least 15/16"
clearance around it.
Figure 1
AN1181-US
Net2
015/16"
05/16"
1-21/32"
05/16"
013/8"
