Aspire TC-651, Руководство по обслуживанию

Страница: 88 / 115

82
BIOS Messages Action/FRU
Keyboard Error Or
No Keyboard
Present Cannot initialize the keyboard. Make sure the keyboard is attached correctly and no
keys are pressed during POST. To purposely configure the system without a
keyboard, set the error halt condition in Setup to HALT ON ALL, BUT KEYBOARD.
The BIOS then ignores the missing keyboard during POST.
Keyboard is locked
out - Unlock the key This message usually indicates that one or more keys have been pressed during the
keyboard tests. Be sure no objects are resting on the keyboard.
Memory Test: This message displays during a full memory test, counting down the memory
areas being tested.
Memory test fail If POST detects an error during memory testing, additional information appears giving
specifics about the type and location of the memory error.
Override enabled -
Defaults loaded If the system cannot boot using the current CMOS configuration, the BIOS can
override the current configuration with a set of BIOS defaults designed for the most
stable, minimal-performance system operations.
Press TAB to show
POST screen System OEMs may replace the Phoenix Technologies Award BIOS POST display
with their own proprietary display. Including this message in the OEM display
permits the operator to switch between the OEM display and the default POST
display.
Primary master hard
disk fail POST detects an error in the primary master IDE
hard drive.
Primary slave hard
disk fail POST detects an error in the secondary master IDE
hard drive.
Secondary master
hard disk fail POST detects an error in the primary slave IDE hard drive.
Secondary slave
hard disk fail POST detects an error in the secondary slave IDE
hard drive.