Aspire TC-651 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 115

Aspire TC-651 Скачать руководство пользователя страница 49

43

Full Screen LOGO Show

Allow you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)

Fast Boot

Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup speed.
(Default: Disabled)

VGA Support

Allow you to select which type of operating system to boot.

Auto Enables legacy option ROM only.

EFI Driver Enables EFI option ROM. (Default)

This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.

USB Support

Disabled All USB devices are disabled before the OS boot process completes.

Full Initial All USB devices are functional in the operating system and during the POST. Partial Initial Part of

the USB devices are disabled before the OS boot process completes. (Default)

This item is configurable only when Fast Boot is set to Enabled. This item is disabled when Fast Boot is set
to Ultra Fast.

PS2 Devices Support

Disabled All PS/2 devices are disabled before the OS boot process completes.

Full Initial All PS/2 devices are functional in the operating system and during the POST. (Default)

This item is configurable only when Fast Boot is set to Enabled. This item is disabled when Fast Boot is set
to Ultra Fast.

NetWork Stack Driver Support

Disabled Disables booting from the network. (Default)

Enabled Enables booting from the network.

This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.

Limit CPUID Maximum (Note)

Allow you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP
operating system; set this item to Enabled for legacy operating system such as Windows NT4.0. (Default:
Disabled)

Execute Disable Bit (Note)

Enables or disables Intel

®

Execute Disable Bit function. This function may enhance protection for the

computer, reducing exposure to viruses and malicious buffer overflow attacks when working with its
supporting software and system. (Default: Enabled)

Intel Virtualization Technology (Note)

Enables or disables Intel

®

Virtualization Technology. Virtualization enhanced by Intel

®

Virtualization

Technology will allow a platform to run multiple operating systems and applications in independent partitions.
With virtualization, one computer system can function as multiple virtual systems. (Default: Enabled)

Intel TXT(LT) Support (Note)

Enables or disables Intel

®

Trusted Execution Technology (Intel

®

TXT). Intel

®

Trusted Execution Technology

provides a hardware-based security foundation. (Default: Disabled)

VT-d (Note)

Enables or disables Intel

®

Virtualization Technology for Directed I/O. (Default: Enabled)

OS Type(Windows 8 Features)

Allow you to select the operating system to be installed. Set this item to Windows 8 for Windows 8 operating
system. (Default: Other OS)

*CSM Support*

Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.

Always Enables UEFI CSM. (Default)

Never Disables UEFI CSM and supports UEFI BIOS boot process only.

This item is configurable only when OS Type is set to Windows 8 or Windows 8 WHQL.

«
...
47
48
49
50
51
...
»

Содержание TC-651




















































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды