C o o p e r W i r i n g D e v i c e s
P a g e |
5
Introduction
The RFTCP units are hardware-based home automation controllers designed to incorporate all
the power and flexibility of Aspire RF™ Software, powered by
HomeSeer,
into a very
compact, rugged, and easy-to-install unit. The RFTCP is designed to control lighting,
appliances, security, HVAC, and infrared (IR) devices, such as home theater equipment.
Since the RFTCP is an open standards system, the system can be integrated with more than
just Cooper Wiring Devices’ Aspire RF products. Door locks, IR controllers and audio/video
equipment are a few examples of additional supported devices. An open Application Program
Interface (API) is included for programmers to add support for just about any custom or
proprietary systems that may be required.
This system uses HSProtect™ technology to protect the operating system on the hard
disk. You must read and understand how HSProtect works in order to operate the
system properly. See the section on HSProtect for more information.
What’s Included
The RFTCP is shipped with the following parts:
RFTCP Automation Controller Gateway Unit
Aspire RF USB Z-Wave Interface
Power Supply Unit
Power Cord
USB System Recovery Drive
The following HomeSeer (brand) software add-ons (“plug-ins”) are available separately
for use with the RFTCP. Plug-ins may be installed from within the RFTCP “updater”. Some
plug-ins are included at no cost; others must be purchased at homeseer.com.
Plug-ins to support the following:
HomeSeer HSTouch Touch Screen design system
Global Cache IR Controller
HomeVision Plug-in
HouseLinc Plug-in
Insteon Basic Plug-in
IRLinc 1623PC Plug-in
Is Speaking Plug-in
iTunes® Media Player
JDS IR XPander Plug-in
JDS Stargate Plug-in
Lightolier Compose Plug-in
Lutron Radio RA
Marrick LynX10-PLC X10 Plug-in
Windows Media Center (MCE) 2005
Windows Media Player 9/10
MR26A Plug-in
Napco Gemini
Ocelot Plug-in
On-Q Panel Plug-in
PowerLinc USB Plug-in
RCS Serial Thermostat Plug-In
