C o o p e r W i r i n g D e v i c e s
P a g e |
15
Configuring Devices
Specifying Device Types
Before adding devices to the RFTCP, you must first specify the types of devices that will be
used. The
Interfaces Setup
screen is where you enable and configure plug-in programs that
can be used with the RFTCP. Plug-ins are designed to integrate the RFTCP with other
hardware and software and to add additional functionality to the RFTCP.
To get to this screen, launch the web interface, click the Setup button beneath the time and
date bar, and then click the Interfaces tab.
Buttons appear under the columns for the type of hardware or software the particular plug-in
supports. By default, the button will be labeled
Disabled
, which indicates that the plug-in is
not enabled or not active. Click the button and select “Aspire RF USB Controller” to enable the
Aspire RF Interface.
By default, this screen will be empty. Select the
Install More Interfaces
link at the bottom, or
click on the
Updater
button to get a list of available interfaces that you can add to the
system.
Click the SAVE button to save the changes.
Figure 4: Interface Setup
