C o o p e r W i r i n g D e v i c e s
P a g e |
11
Web Browser
The RFTCP can be configured using a web browser on the RFTCP unit itself, or from any other
web browser anywhere in the world. The built-in web server is enabled by default. To
configure it, navigate to the
Setup
area and click on the
Web Server
tab. Options in this
screen determine the port the web browser will use to access the RFTCP and whether or not
guests can view events. The features accessible through the web browser depend on options
set in the
Web Server Setup
screen and access rights of the user as set in the
Web Users
Setup
screen.
The RFTCP web page can be accessed using one of the following methods:
On the computer running the RFTCP, launch Internet Explorer and type
http://localhost or http://127.0.0.1 in the
Address
bar and press Enter or click Go.
On a computer on the same network as the RFTCP (home network), type
http://hostname where “hostname” is the name of the RFTCP (RFTCP) alternately,
type http://192.168.0.n, where “n” is the last number of the IP address of the RFTCP
on the home network. This IP address is typically assigned by your home network
router.
On a computer other than the one running the RFTCP, launch Internet Explorer and
type http:// followed by the IP address of the RFTCP.
Touchscreens, Smart Phones and Tablets
The RFTCP unit is compatible with the Aspire RF iOS and Android application. Please see the
appropriate app store for details.
Figure 2: RFTCP Web Browser
NOTE: Which buttons appear at the top of the web page depends on which options are enabled in the
Web Site Setup
screen. This Installation Guide assumes that all available buttons have been enabled.
