C o o p e r W i r i n g D e v i c e s
P a g e |
24
screen (see Figure 9 below). In this screen, enter the static IP address or your
“MyHomeSeer-Connect‟ address. For information about HomeSeer’s
“MyHomeSeer-Connect‟ service, visit homeseer.com.
4) For security purposes, you’ll need to enter a “Connection Username” and
“Connection Password” on this screen also. Be sure to enter a username and
password from the “Web Users” tab of the Setup screen in your RFTCP.
NOTE: This login must have “normal‟ or “admin‟ privileges.
5) Click “OK” to save your settings and then click “Connect” on the main speaker
application client screen to establish a connection to your RFTCP.
Voice Recognition Events
Events can be triggered by voice command via microphone or telephone (or both). For
microphone use, the Speaker Client application must first be installed and configured. By
default, the speaker client is already running on the RFTCP. If the client is not needed on the
RFTCP system, edit the file startup.txt in the scripts folder and remove the launch command.
For telephone use, HomeSeer Phone software and the Way2Call Hi-Phone USB voice
interface must first be installed and configured.
To control an event by voice, go to the
Event Properties
screen for that event (see page
Figure 10: Speaker Client Options Screen
