ASP motioncare LIANA, Руководство пользователя

Страница: 24 / 50

Gebrauchsanweisung LIANA
| Version 1.0
Seite 24 von 50
8. FINE ADJUSTMENT OF ARMRESTS
To adjust the armrests to the correct length, loosen
the lower star grip
(7) and move the armrest
forwards or backwards until the desired position is
reached. Repeat the process on the other side. The
positioning lines on the arms/struts make it easier
to position the armrest at the same distance.
To adjust the armrests inwards and/or outwards
(sideways), pull back the locking lever
(8) and move
the armrest to the right or left. Make sure that the
locking
lever/latching element re-engages
accordingly once the desired position has been reached. Repeat the process on the other side.
After setting the desired position, make sure that all components have been fixed or engaged.
Adjust the height position of the armrests using the manual switch and/or the column keypad. Patient places
arms on the armrests and grasps the handles. The patient then assumes a "ski jumper" position by bending
forward slightly.
9. STANDING UP
The patient is assisted by a medical
specialist/therapist when standing up. The second
therapist raises the height of LIANA and the patient
bed in parallel using the manual switches until the
patient has reached an upright position. The
specialist/therapist makes sure that the patient's
feet are always in contact with the floor and that
their shins are stably supported by the leg supports.
If this is not the case, the "standing" mobilisation
process must be interrupted and performed elsewhere.
10. LUMBAR STRAP
To ensure maximum possible safety, we
recommend attaching the lumbar strap
(9) for
additional stability. The lumbar strap (9) is attached
to the mounts in the rear area of the lumbar support
and closed using the two Velcro mounts behind the
patient's buttocks area. To prevent the Velcro from
opening, this area should be lightly held in place by
a medical specialist/therapist.