ASL INTERCOM ENCHORUS ENC 1202 Скачать руководство пользователя страница 46

Страница: 46 / 53

Appendix

Optional 19” Rackmount Kit for Two ENCHORUS Devices (RM ENC DUAL)

ENC 1202

Version 1.0 Page

3. Using two cylinder-head screws, attach the front connecting blind to the right edge

of the ENCHORUS’s front panel.

4. Using two cylinder-head screws, attach the left front blind to the left edge of the

ENCHORUS’s front panel.

Loosen the four cylinder-head screws at the back of the ENCHORUS and remove

them.

Remove the rubber bumper from the ENCHORUS’s rear panel.

Take care to hold the ENCHORUS’s rear panel in place.

7. Retighten the two cylinder head screws on the right side of the ENCHORUS’s rear

panel.

8. Using two cylinder-head screws, attach the connecting blind to the left edge of the

ENCHORUS’s rear panel.

The first ENCHORUS device is now ready.

Adding the Second ENCHORUS Device (the right one in the rack)

1. Loosen the four cylinder-head screws at the front of the second ENCHORUS and

remove them.

Remove the rubber bumper from the ENCHORUS’s front panel.

3. Using two cylinder-head screws, attach the right front blind to the right part of the

ENCHORUS’s front panel.

Using two cylinder-head screws, secure the connecting blind affixed to the front

panel of the first ENCHORUS to the left edge of the second ENCHORUS’s front panel.

Loosen the four cylinder-head screws at the back of the second ENCHORUS and

remove them.

Remove the rubber bumper from the second ENCHORUS’s rear panel.

Take care to hold the ENCHORUS’s back panel in place.

Содержание ENCHORUS ENC 1202






















































Результаты поиска

Содержание ENCHORUS ENC 1202

Отзывы:

Похожие инструкции для ENCHORUS ENC 1202

Бренды по названию

Популярные бренды

ASL INTERCOM ENCHORUS ENC 1202, Руководство по эксплуатации

Результаты поиска

Содержание ENCHORUS ENC 1202

Отзывы:

Похожие инструкции для ENCHORUS ENC 1202

Бренды по названию

Популярные бренды