ASL INTERCOM ENCHORUS ENC 1202 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 53

background image

Introduction

About this Manual

ENC 1202

Version 1.0 Page

6

1.2 About this Manual

This manual is intended to get you up and running with the ENC 1202’s comprehensive

feature set. It also contains important instructions for a safe use of your ENC 1202.
For questions that are not answered in this document, feel free to contact your local ASL

distributor or ASL directly.
Be sure to store this document in a safe location, close to the ENC 1202.

If you intend to share this device with other users, remember to also hand them this

document.

1.3 Warranty and Copyright

Warranty or legal claims need to be communicated in writing within two working days.
In no event shall ASL be liable for damages to the device itself or consequential damage

caused by this device due to inappropriate handling.
More specifically, the manufacturer shall not be liable for failures or errors caused by

modifications by the user or a third party.
In the event of a defect for which ASL can be held accountable, the manufacturer has the

right to repair or replace the unit at his own discretion.
Claims regarding material or legal defects shall be null and void if they can be attributed

to the fact that the user failed to heed the instructions set out in this document,

applicable laws and/or other instructions issued by ASL.
This product is supplied as is. In no event shall users be entitled to demand a previous

version or the possibility to update their product to a newer feature set.

The device described in this document contains software applications developed by ASL

and functionalities referred to as “software”.
ASL owns the copyright to this software. Where those rights belong to a third party, ASL

has obtained the applicable rights of use.
The software contains business secrets and protected content.
In no event shall the manufacturer be liable for defects caused by modified, expanded

or damaged software, unless it can be established that such a modification could not

possibly have caused the defect.
Any other warranty obligations are hereby expressly excluded.

«
...
4
5
6
7
8
...
»

Содержание ENCHORUS ENC 1202






















































Отзывы:

Нет отзывов

Похожие инструкции для ENCHORUS ENC 1202

Бренд: Landoll Страницы: 34

Бренд: YSI Страницы: 70

Бренд: jcb Страницы: 41

WJHD100 - DIGITAL DISC RECORDE

Бренд: Panasonic Страницы: 7

Movie FL Black E27 Flaps

Бренд: Qazqa Страницы: 2

Precision2 HP2 Series

Бренд: B-K lighting Страницы: 6

Бренд: Zero Hand Truck Страницы: 38

Бренд: B-K lighting Страницы: 3

Бренд: Fenton Страницы: 16

Бренд: Omlet Страницы: 60

Бренд: Velp Scientifica Страницы: 16

Бренд: Velp Scientifica Страницы: 2

Бренд: Velp Scientifica Страницы: 32

Бренд: Velleman-Kit Страницы: 32

Бренд: TANNER Scientific Страницы: 44

Бренд: Landoll Страницы: 144

Бренд: Castellini Страницы: 299

Бренд: Lowenstein Medical Страницы: 457

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды