manualshive.com logo in svg

ashtech Z-Xtreme, Системное руководство

Поделиться
Скачать
ashtech Z-Xtreme Скачать руководство пользователя страница 50

40

Real-Time Kinematic Surveying

  

The handheld computer – GPS receiver connection particulars are identical for the 
base and rover systems.  Please refer to the discussion on handheld computer – GPS 
receiver connection under the Base System above for more details.

GPS Receiver - Receiver Power System

Under most operational conditions, the rover system will be powered by the internal 
battery to the Z-Xtreme receiver.  An optional external power source is available for 
use on the rover system if extended operation is required without interruption.  The 
external power source is connected to the GPS receiver via a dedicated external 
power cable.  

The external power source and cable is identical for the base and rover system.  For 
details on the connection, please refer to the GPS Receiver – Receiver Power Sys-
tem section under Base System above.

Now that we have reviewed the connectivity of each backpack rover system compo-
nent individually, let’s examine each primary component fully connected, beginning 
with the Z-Xtreme receiver.

 Figure 3.21  

Computer Communication Cable

Содержание Z-Xtreme







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды