manualshive.com logo in svg

ashtech Z-Xtreme, Системное руководство

Поделиться
Скачать
ashtech Z-Xtreme Скачать руководство пользователя страница 20

10

Real-Time Kinematic Surveying

antenna is designed to function in the most demanding multipath environments.     

Radio

The radio is the mechanism through which the base and rover GPS receivers commu-
nicate in the RTK system.  Therefore, a radio is a component of both the base and 
rover systems.  As explained earlier, the base GPS receiver must transmit its raw data 
to the rover GPS receiver in order for the rover GPS receiver to compute the vector 
between the base and rover systems.  The base system transmits the data and the 
rover system receives the data using radios.  The base radio is usually the larger of 
the two since it must have transmit capabilities.  It also consumes much more power.  
The rover receiver needs only to receive the transmission.  This requires much less 
capability and power consumption.  In some RTK systems, the rover radio is so small 
that it is embedded inside the rover GPS receiver. Two distinctly different radio types 
are available with the ZX SuperStation, one working in the UHF/VHF frequency 
range, and another in the spread-spectrum frequency range.  Distance requirements 
between the base and rover systems will primary dictate which radio system to 
choose.

UHF/VHF

If the intent is to perform RTK surveys with distances between the base and rover in 
excess of 2 km, then a radio functioning in the UHF or VHF frequency range is recom-

 Figure 2.3   

Choke Ring Antenna for Severe Multipath Environment

Содержание Z-Xtreme







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды