manualshive.com logo in svg

ashtech Z-Xtreme, Системное руководство

Поделиться
Скачать
ashtech Z-Xtreme Скачать руководство пользователя страница 19

9

Component

s

Geodetic IV Antenna

The Geodetic IV antenna, Figure 2.2,  is the standard antenna used by the base and 
rover RTK systems.  It is small, lightweight, and meets the needs of most users.  This 
is the only antenna available for use with the rover system.  The other antenna option 
is too large and heavy for practical use on the rover.    

The Geodetic IV antenna is available with an optional groundplane attachment, which 
is effective in reducing noise created by satellite signals reflecting off nearby obstruc-
tions.  The technical name for this noise is multipath.  The groundplane attachment 
reduces the effects of multipath on the data collected.  In order to be effective at 
reducing the effects of multipath, the groundplane attachment significantly increases 
the size and weight of the antenna.  For this reason, the groundplane attachment is 
only recommended for use at the base station.  If the base system is to be located in 
an area where obstructions, such as metal buildings, may cause multipath, the 
groundplane attachment is a good option.

Choke Ring Antenna

The choke ring antenna,  Figure 2.3, is the ultimate antenna for multipath rejection.  If 
the base system is to be located in a harsh multipath environment, the choke ring 
antenna is advisable.  An example of a harsh multipath environment would be the top 
of a building which houses large metal compressors and air conditioning units.  These 
structures will reflect satellite signals which the antenna may pick up.  The choke ring 

 Figure 2.2   

Geodetic IV GPS Antenna - without and with Groundplane 

Содержание Z-Xtreme







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды